Contactor Operating Principle and Standards ~ Learning Electrical Engineering

Custom Search

What is a Contactor?
A contactor is an electrical device used for switching an electrical circuit on or off. It is similar to a relay, but the main difference is that the contactor is applied in high current carrying capacity applications and the relay used for low current applications.

Generally, these electrical devices feature multiple contacts. These contacts are in most cases normally open and provide operating power to the load when the contactor coil is energized. Contactors are mostly used for controlling electric motors.

There are various types of contactors, and each type has its own set of features, capabilities, and applications. Contactors can break current over a wide range of currents, ranging from a few amperes to thousands of amperes, and voltages from 24 VDC to thousands of volts. In addition, these electrical devices come in various sizes, from palm dimensions to sizes measuring a meter or yard on one side (approximately).

The most common application area of the contactor is high-current load. Contactors are known for their capability to handle currents of over 5,000 amperes and high power over 134Hp

Main Components of the Contactor
The electrical contactor has three (3) main components namely the (i) Coil (Electromagnet) (ii) Enclosure (iii) Contacts.

The Coil or Electromagnet provides the driving force that is required to close the contacts of the contactor. The coil and contacts are protected by an enclosure.

The enclosure provides insulation and protection from personnel touching the contacts. The protective enclosure is made from different materials, such as polycarbonate, polyester, Nylon 6, Bakelite, thermosetting plastics, and others.

The contacts of the contactor are responsible for carrying rated current to the load the contactor powers. There are different types of contacts in a contactor namely, contact springs, auxiliary contacts, and power contacts. Each type of contact has an individual role to play.

Symbols of Contactors in Wiring Diagrams

Below are typical representations of contactors in electrical and control wiring diagrams:

Operating Principle of a Contactor

When current is supplied to a contactor, the electric current excites the electromagnet. The excited electromagnet produces a magnetic field, causing the contactor core to move the armature as shown in our schematic below:

A normally closed (NC) contact completes the circuit between the fixed contacts and the moving contacts. This permits the current to pass through these contacts to the load. When current is removed, the coil is de-energized, and the circuit is open. The contacts of the contactors are known for their rapid open and close action.

One unique quality of contactors is that their coils can be powered by both DC and AC currents. Typical voltages include 12VDC, 24VDC and 220V AC with the most popular in use being the 24V DC for many control circuit applications. Contactors are primarily used for controlling single and three-phase motors and switching power circuits.

Contactor Standards

There are two standards for contactors: NEMA and IEC.

NEMA Contactors

NEMA means National Electrical Manufacturers Association. NEMA contactors also are designed with safety factors that go beyond design ratings (oversized), up to as much as 25%. NEMA is primarily a North American Standard. NEMA contactors for low-voltage motors (less than 1,000 volts) are rated according to NEMA size, which gives a maximum continuous current rating and a rating by horsepower for attached induction motors. NEMA standard contactor sizes are designated 00, 0, 1, 2, 3 to 9. The table below details standard NEMA Contactors and Motor starters:

NEMA CONTACTOR AND MOTOR STARTER SIZES
NEMA Size	Max. Continuous Current (A)	Max. HP at 200V AC	Max. HP at 230V AC	Max. HP at 480/575V AC
00	9	1.5	1.5	2
0	18	3	3	5
1	27	7.5	7.5	10
2	45	10	15	25
3	90	25	35	50
4	135	40	50	100
5	270	75	100	200
6	540	150	200	400
7	810	-	300	600
8	1215	-	450	900
9	2250	-	800	1600

IEC Contactors

IEC means International Electrotechnical Commission and it is a global standard. IEC contactors are not oversized. They are smaller than NEMA contactors and less expensive. The range of sizes offered by manufacturers is more numerous than the ten NEMA standards. As such, they are more specific to a given application and are specified when the operating conditions are well understood. Whereas NEMA may be chosen when operating conditions, such as load are not well defined. The table below illustrates the IEC contactors utilization categories low voltage applications.

IEC UTILIZATION CATEGORIES
LOW VOLTAGE UTILIZATION CATEGORIES
Nature of Current	Category	Typical Applications	Relevant IEC product category
A.C	AC-1	Non-inductive or slightly inductive loads, resistance furnaces.	60947-4
	AC-2	Slip-ring motors: starting, switching off.
	AC-3	Squirrel-cage motors: starting, switching off motors during running.
	AC-4	Squirrel-cage motors: starting, plugging¹, inching²
	AC-5a	Switching of electric discharge lamp control.
	AC-5b	Switching of incandescent lamps.
	AC-6a	Switching of transformers.
	AC-6b	Switching of capacitor banks.
	AC-7a	Slightly inductive loads in household appliances and similar applications.
	AC-7b	Motor-loads for household applications.
	AC-8a	Hermetic refrigerant compressor motor control with manual resetting of overload releases.
	AC-8b	Hermetic refrigerant compressor motor control with automatic resetting of overload releases.
	AC-12	Control of resistive loads and solid-state loads with isolation by optocoupler.	60947-5
	AC-13	Control of solid-state loads with transformer isolation.
	AC-14	Control of small electromagnetic loads.
	AC-15	Control of A.C electromagnetic loads.
	AC-20	Connecting and disconnecting under no-load conditions.	60947-3
	AC-21	Switching of resistive loads, including moderate overloads.
	AC-22	Switching of mixed resistive and inductive loads, including moderate overloads.
	AC-23	Switching of motor loads or other highly inductive loads.
A.C and D.C	A	Protection of circuits, with no rated short-time withstand current.	60947-2
A.C and D.C	B	Protection of circuits, with a rated short-time withstand current.	60947-2
D.C	DC-1	Non-inductive or slightly inductive loads, resistance furnaces.	60947-4
	DC-3	Shunt-motors, starting, plugging1, inching², dynamic breaking of motors.
	DC-5	Series-motors, starting, plugging1, inching², dynamic breaking of motors.
	DC-6	Switching of incandescent lamps.
	DC-12	Control of resistive loads and solid-state loads with isolation by optocouplers.	60947-5
	DC-13	Control of D.C electromagnets.
	DC-14	Control of D.C electromagnetic loads having economy resistors in circuit.
	DC-20	Connecting and disconnecting under no-load conditions.	60947-3
	DC-21	Switching of resistive loads, including moderate overloads.
	DC-22	Switching of mixed resistive and inductive loads, including moderate overloads, (e.g. shunt motors).
	DC-23	Switching of highly inductive loads, (e.g. series motors).
¹By plugging is understood stopping or reversing the motor rapidly by reversing motor primary connections while the motor is running. ²By inching (jogging) is understood energizing a motor once or repeatedly for short periods to obtain small movements of the driven mechanism.
Source: ©International Electrotechnical Commission

Difference between NEMA and IEC Contactors
Below is a comparison between NEMA and IEC contactors already discussed:

IEC	NEMA
Less Expensive	More Expensive
More Compact	Larger design
Global Market	North American Market
Less versatile: IEC contactors are specific application requirements	More versatile: A NEMA contactor can cover a broader range of applications
Finger Safe	Safety covers required
Faster reaction to overloads	Can handle short circuits better

Contactor Terms and Ratings
The table gives explanation of the common terms and ratings used with contactors designed based on the IEC global standard:

Circuits	Auxiliary circuit All the conductive parts of a contactor designed to be inserted in a different circuit from the main circuit and the contactor control circuits. Control circuit All the conductive parts of a contactor (other than the main circuit and the auxiliary circuit) used to control the contactor's closing operation or opening operation or both. Main circuit All the conductive parts of a contactor designed to be inserted in the circuit that it controls.
Coil operating range	Expressed as a multiple of the rated control circuit voltage Uc for the lower and upper limits
Cycle time	This is the sum of the current flow time and the no-current time for the given cycle. Electrical durability Number of on-load operating cycles that the contactor is able to carry out. It depends on the operational current, the operational voltage, and the utilization category. Mechanical durability Number of no-current operating cycles that a contactor can carry out.
Endurance/durability	Electrical endurance The number of on-load operating cycles (i.e., with the current on the main contacts) a contactor can achieve, varies depending on the utilization category. Mechanical endurance The number of off-loading operating cycles (i.e., without current on the main contacts) a contactor can achieve.
Inching	Energizing a motor once or repeatedly for short periods to obtain small movements of the driven mechanism.
Intermittent Duty	Duty in which the main contacts of a contactor remain closed for periods of time insufficient to allow the contactor to reach thermal equilibrium, the current-carrying periods being separated by off-load periods of sufficient duration to restore equality of temperature with the cooling medium.
Rated breaking capacity. Rated making capacity	Value of RMS current a contactor can break or make at a fixed voltage value, within the conditions specified by the standards, depending on the utilization category.
Rated control circuit voltage Uc	Control voltage value for which the control circuit of the unit is sized.
Rated insulation voltage Ui	Voltage value which designates the unit and to which dielectric tests, clearance, and creepage distances are referred.
Rated impulse withstand voltage, Uimp	The highest peak value of an impulse voltage of prescribed form 1.2/50, which does not cause breakdown under specified test conditions.
Rated operating current Ie	Current value stated by the manufacturer and considering the rated operating voltage Ue, the rated frequency, the rated duty, the utilization category, the electrical contact life and the type of protective enclosure.
Rated operating voltage Ue	Voltage value to which utilization characteristics of the contactor are referred, i.e., phase to phase voltage in 3 phase circuits.
Conventional thermal current Ith	Value of current the contactor can withstand with poles in closed position, in free air for an eight-hour duty, without the temperature rise of its various parts exceeding the limits specified by the standards.
Making and breaking current	Current at contactor closing or at contactor opening.
Resistance to shocks	Requirements applicable for instance to vehicles, crane operation or switchgear slide-in module systems. At the quoted permissible «g» values, contactors must not undergo a change in switching state and overload relays must not trip.
Resistance to vibration	Requirements applicable to all the vehicles, vessels and other similar transport systems. At the quoted amplitude and vibration frequency values, the unit must be capable to achieve the required duty.
Times	Closing time Time between energization of the coil until the moment the contacts of the first current path to be closed, actually close. Opening time Time between de-energization of the coil until the moment when the contacts of the last current path to be opened are open. Minimal operation time Shortest control duration to ensure complete closing or opening of a contactor. Short time current permissible Value of current which the contactor can withstand in closed position for a short time period and within specified conditions. Time constant Ratio of inductance to the resistance: L/R = mH/Ohm = ms. Cycle duration Total time of the on-load + off-load period.

Contactor Operating Principle and Standards

You May Also Like: